T-ShirtVeterans
From single pieces to full crew runs, Gerber gets embroidered gear with honest pricing and a 5 to 7 day door-to-door timeline.
Gerber crews order embroidered gear from us because the numbers are public and the process is simple: free design help, a written proof within 24 hours, and delivery to any Gerber address in 5 to 7 business days.
From one end of Gerber to the other, 0.9 square miles, the shipping promise does not change: 5 to 7 business days, tracked. Nearby crews are already in the coverage circle, with Proberta, CA (2 mi), Tehama, CA (3 mi), Los Molinos, CA (4 mi) sharing the identical pack rates and timelines. For the military community, Beale Air Force Base sits about 70 miles away, well inside our normal unit-order routes.
The whole process runs remote: rough idea in, free designer-built proof back, written approval, and finished gear delivered to Gerber.
A typical week of embroidery orders from this corner of California mixes Gerber crews with neighbors like Proberta, 2 miles over, all running through the same designer, the same proof cycle, and the same tracked delivery.
Structured trucker and baseball caps with digitized front logos, stitched clean at any quantity. Nobody chases an order here. Your contact tells you where it stands before you have to ask.
Polos with stitched logos that survive years of office and field rotation. Bring a rough idea, even a phone photo of a whiteboard, and our designers make it print ready at no charge.
Outerwear embroidery digitized per fabric, from chest marks to full backs. Packs mix garment colors freely, so squads, shifts, or grade levels can each get their own.
Insignia and patch work handled with the trademark rules and the history both respected. Mixed sizes and colors in one run are standard here, not a special request.
Duffels, totes, and range bags with stitched identity that outlasts any print. Start from a napkin sketch if that is what you have. Turning rough into print ready is the job.
High-loft stitching on cap fronts for the bold, raised look everyone points at. Start from a napkin sketch if that is what you have. Turning rough into print ready is the job.
Serving the military community is not a marketing line here, it is the operating system. Gerber customers deal with one accountable person, get dates that mean something, and receive work held to a uniform standard.
Honesty runs in both directions here. A doomed timeline or a design that will disappoint gets called out early, with an alternative attached.
The Design Lab puts your art on the real garment, takes your size counts, and totals the whole order, shipping included, without asking who you are.
Garment choice makes or breaks the order. These are the blanks Gerber customers pick most, all designable online on real product photos.
Stitch a chest mark on this 8.0oz hoodie and watch it become the most-kept item of the season. The proof comes first and it is free, so what arrives is exactly what you signed off on.
Embroidered crews outlast printed ones in daily wear, which is why staff uniforms usually go this route. The proof comes first and it is free, so what arrives is exactly what you signed off on.
The embroidered tee: understated, uniform-grade, and comfortable enough to actually wear. Packs mix garment colors freely, so squads, shifts, or grade levels can each get their own.
Design help is not an upsell here, it is how orders start. Describe the concept in a sentence, attach whatever reference you have, and within 24 hours a real designer returns a proof drawn as clean vectors, era-correct where it matters. Revisions cost nothing and continue until the proof is right, and your written approval is the only thing that sends it to production.
The Design Lab is there when you want to drive: upload, place, and price the design yourself on the exact garment we print.
No mystery pricing. These are the published packs on our light cotton tee, front print included, and Gerber customers watch the per piece cost fall as quantity climbs.
| Pieces | Total | Each | Ship | Back print add |
|---|---|---|---|---|
| Pack of 10 | $180 | $18 ea | $18 | $4 ea |
| Pack of 15 | $250 | $16.67 ea | $18 | $4 ea |
| Pack of 20 | $320 | $16 ea | $20.99 | $4 ea |
| Pack of 25 | $375 | $15 ea | $20.99 | $3 ea |
| Pack of 50 | $700 | $14 ea | $22.99 | $2 ea |
| Pack of 100 | $1200 | $12 ea | FREE | $2 ea |
Add-on pricing is deliberately boring: back print per the table (later $3, then $2), oversize front $3 or $2 by volume, extended sizes $6 or $4 by volume. That is the complete list, and the Design Lab computes it live before any quote is written.
The first step is just getting the idea out of your head: type it into the quote form or mock it up in the Design Lab, rough edges and all.
Twenty-four hours gets you a designer-built proof on the exact blank you chose. Iterate freely until it is right.
Your written approval is the gate. Until it exists, nothing prints; once it exists, exactly that design prints.
Approval to doorstep runs 5 to 7 business days as the default, faster when rush is booked and honestly refused when it cannot be.
Your art and specs stay on file, so reorders match the first run exactly, down to the ink.
Delivery to Gerber addresses follows one simple clock: 5 to 7 business days including production, with tracking from the moment it leaves. Hit 100 pieces and the shipping line drops to zero.
The roster is the packing list: every size counted into the box, tracking issued at pickup, and any shortage or transit damage made right at our cost without argument.
Yes. The Design Lab shows live pack pricing, back print costs, size upcharges, and shipping as you build your design.
The standard clock is 5 to 7 business days covering both production and delivery. Many orders can run faster; name the date and we will confirm or decline honestly.
Yes, and it costs nothing with your order. Send a sketch, an old logo, or just the idea, and a designer sends a print ready proof within 24 hours.
Large runs are the core business: hundreds of pieces, mixed sizes, multiple colors, one named contact who owns it from first proof to the delivery scan.
Simple math: 2XL and up cost $6 more per piece on small orders and $4 more per piece from 25 pieces. No other size fees exist, and the Design Lab totals it live.
Custom work does not come back: due to custom orders, all work is finalized and no returns are accepted. The protection is up front instead, a free proof that must be approved in writing before anything prints, so check sizing and art carefully at that stage.
Our minimum is 10 pieces. Packs for your Gerber crew begin at 10, the per piece price falls as the count climbs, and shipping goes free at 100.
More answers on the full FAQ page.
See everything we deliver to Gerber, browse embroidery across California, or read the full embroidery service page. Other services in Gerber: Screen Printing, DTG and DTF Printing, Sublimation, Banners and Signs, Custom Design.
Send the idea, get a free proof in 24 hours, approve it in writing, and pay exactly the published pack price.